Rudder Gear | Transom Fitting – upper (gudgeon) | HL-2120 | 1 | Assumes lifting rudder 1 7/8″ width of cheek |
| Transom Fitting – lower (pintle) | HL-2152 | 1 | |
| Upper rudder strap – (pintle) | HL-2134 | 1 | Assumes lifting rudder 1 1/2″ width of cheek |
| Lower rudder strap – (gudgeon) | HL-2104 | | Use HL-2100 and HL-2130 if 3/4″ fixed rudder fitted |
| Pivot Bolt | HL-2265 | 1 | 5/16″ diameter, includes bushes (if lifting rudder used) |
| Downhaul line cleat | HL-0095 | 1 | tube cleat sugested |
Keelband | 3/4″ wide | HL-0702 | 8 | 1 length 3′ 6″, one 4′ 6″. These lengths will vary depending on whether daggerboard is fitted. Please note that for non-UK customers this may be impractical to ship |
| 1/2″ wide | HL-0701 | 7 | 2 lengths 1′ 6″ each side of plate case 2 lengths 2′ 0″ on bilge runners if fitted |
Rowlocks | Side Sockets | HL-0003 | 2 | |
| Rowlocks | HL-0001 | 2 | |
Mooring equipment | 4″ handed fairleads | HL-0146 | 1 | i.e 1 pair-omit if boat to be dry sailed |
| 4″ straight fairleads | HL-0156 | 2 | Mounted on transom? |
| 5″ Ash cleats | HL-1034 | 2 | suggest ash, but teak or bronze would do – if fitted at all |
| | | | |
Buoyancy (requirements will vary with the amount of decking fitted and the type of use intended for the boat) | Small Bow bag | HL-0570 | 1 | 45 kg buoyancy, fits forward of lug mast. If sloop rig fitted HL-0571 (136 kg buoyancy) might fit |
| Pillow bag – 30 x 9 | HL-0574 | 1 | 27 kg buoyancy, fitted ahead of transom |
| Pillow bags – 24 x 7 | HL-0573 | 2 | 18 kg buoyancy each, fitted below thwarts – 2 more possible under seats if fitted |
Drain Bung | Captive type | HL-0560 | 1 | |